Jinan Insulated Pipe Cutting and processing are both very convenient, and the joint areas are handled with matching connecting pieces—operation is simple, fast, and standardized. Before hot-melt welding of PU insulated pipes, the pipe must be cut. Are there any tips for cutting PU insulated pipes? How can you cut PU insulated pipes without going askew? Here is a brief introduction.
First, measure the required length according to drawings and the pipeline.
Second, cut with PU insulated pipe shears, pipe cutters, or cutting tools, adjusting the blade jaws to match the diameter of the PU insulated pipe being cut.
Third, cutting angle: the PU insulated pipe shears shall cut perpendicular to the pipe axis (horizontal centerline), applying force evenly. Extra care shall be taken to apply even force when rotating a pipe cutter.
Fourth, after PU insulated pipe is cut, the cut end shall be rounded with a matching rounding tool. Burrs and flash shall be removed from the cut face, which shall be kept clean, dry, and oil-free.
If you still have questions about Jinan insulated pipe, you may inquire directly at the following URL: https://www.sdhpgy.com
