1. Use suitable tools: When cleaning prefabricated direct-buried insulated pipes, be careful and use non-abrasive tools. Soft cloths and plastic wipes will not damage the surface of stainless steel decorative square tubes. Of course, you can also use stainless steel decorative square tube cleaning balls, but you must wipe according to the manufacturer's grinding marks.
2. Wipe along the grinding lines: some decorative stainless steel square tubes have grinding lines or “grain” on the surface. If grinding lines are present, wipe in the same direction as the lines. If the grain is unclear, wipe carefully with a soft cloth or plastic pad.
3. Alkaline, chlor-alkali, or bleach-free detergents: Many traditional detergents contain bleach; the industry now offers more bleach-free detergents. If you are told that the detergent you use contains bleach, ask whether there is an alternative. They may have a bleach-free detergent available. Of course, avoid detergents containing chloride salts, as these may cause pitting or rust.
4. Water purification: Although implementing this solution is not very practical, softening hard water can indeed reduce a large amount of deposits. Install a filter to filter out these odorless and corrosive components. Adding salt to a water softener is also helpful. If you are unsure about water purification methods, you can call a water treatment specialist.
5. Keep your food equipment clean and sanitary: Use an alkaline, chloride-containing, bleach-free detergent at the recommended concentration and clean frequently to prevent hard deposits. If a stainless steel decorative square tube is used in a boiling-water device, remember that this may damage the rust layer on the stainless steel decorative square tube; a more likely cause is bleach and water hardness. Detergents containing bleach produce the same adverse effects when heated.
The above content is by Jinan Insulated Pipe compiled. For more details, please follow us https://www.sdhpgy.com
