Four Methods for Measuring the Length of Direct Buried Insulation Pipe

It is very important for manufacturers of directly buried insulating pipes to grasp the correct size. Its width is better measured, but because its length is too long, the method of measuring the length will also be studied. Today, Shandong directly buried insulating pipe manufacturers come to share several methods of measuring the length of directly buried insulating pipes. Interested friends can learn about it.

1. Selection of improved encoder for measurement

In fact, this method of measuring the length is attributed to the direct type, that is, through measuring the distance between the two ends of the steel pipe and their respective reference points, so as to directly measure the length of the directly buried insulation pipe.

2. Measuring by grating ruler

Two fixed length grating rulers are set on the outer side of the two ends of the directly buried insulating pipe, and then the rodless cylinder is used to drive the grating ruler near the two ends of the steel pipe, so that the length of the directly buried insulating pipe can be measured by the interference of light.

3. Selection of cameras for measurement

The length of directly buried insulating pipe is measured by image processing.

4. Selecting Encoder to Measure

This method needs to install a coder in the place of the oil cylinder. The directly buried insulating pipe uses the oil cylinder to propel the steel pipe to move on the roller track. Then a series of photoelectric switches with equal intervals need to be installed on the other side. When the steel pipe is touched by the photoelectric switch at the end of the oil cylinder propelling pipe, it will be from the coder recorded. The length of the steel pipe can be calculated by reading and calculating the stroke of the cylinder.

In summary, all the above-mentioned Shandong Hipper Pipe Technology Development Co., Ltd. provides, want to know more about Jinan insulation pipe knowledge, welcome to pay attention to our website: https://www.sdhpgy.com Thank you for your support!