1. In order to prevent the deformation of the cast-iron plate, when hoisting the cast-iron polyurethane insulation pipe platform, four steel wire ropes of the same length should be used to hang the four lifting holes on the cast-iron plate at the same time, and the cast-iron plate should be stably hoisted on the transportation tool.

2. The supporting points of cast iron polyurethane insulation pipe platform shall be well padded and leveled to ensure that each supporting point is evenly stressed and the whole cast iron plate is stable.

3. During the installation of cast iron polyurethane insulation pipe platform, each supporting point of cast iron plate shall be padded with adjusting pad iron, which shall be adjusted to qualified precision by professional technicians.

4. When using the cast-iron polyurethane insulation pipe platform, handle the workpiece gently, and do not move the rough workpiece on the cast-iron plate, so as to avoid damage to the working face of the cast-iron plate such as collision, scratch, etc.

5. In order to prevent the integral deformation of the cast iron polyurethane insulation pipe platform, the workpiece should be removed from the cast iron plate after use, so as to avoid the deformation of the cast iron plate caused by the heavy pressing of the cast iron plate for a long time.

6. When the cast iron polyurethane insulation pipe platform is not in use, the working surface shall be cleaned in time, then coated with a layer of antirust oil, covered with antirust paper, and covered with the outer package of the cast iron plate, so as to prevent the damage to the working surface of the cast iron plate caused by carelessness at ordinary times.

7. Cast iron polyurethane insulation pipe platform shall be installed in a ventilated and dry environment, and away from heat source, corrosive gas and corrosive liquid.

8. Cast iron polyurethane insulation pipe platform shall be subject to periodic weekly inspection according to national standards, and the verification period can be 6-12 months according to specific conditions. Packaging: two forms of iron plate packaging and wooden packaging. The surface of the platform is sealed with plastic film. This packaging is suitable for inland transportation of the flat plate, and has good measures to protect the flat plate, such as moisture-proof, shockproof, rust proof and rough handling, so as to ensure safe transportation to the site.

Transportation of polyurethane insulation pipe platform: transportation is an important link to ensure that the flat plate does not deform, so when transporting the flat plate, it is necessary to ensure that it is not overloaded, overspeed, fatigue driving, or transported in bad weather.

Precautions for use: polyurethane insulation pipe platform shall be installed and debugged before use. Then, wipe the working surface of the plate clean, and use it when there is no problem. During the use process, pay attention to avoid excessive collision between the workpiece and the working surface of the plate, and prevent damaging the working surface of the plate; The weight of the work piece shall not exceed the rated load of the flat plate, otherwise, the work quality will be reduced, the structure of the flat plate may be damaged, and even the flat plate will be deformed, so that it can not be used.